Alu-clad PVC
Aluminum on both faces. A PVC core doing the insulating.
- Inside
- Aluminum cladding over a PVC core
- Outside
- Aluminum cladding
Corner cutaway. Aluminum covers both faces; the multi-chamber PVC core is visible in the cut.
Rendering
Selecting this family for a Canadian project
For uPVC, confirm reinforcement, finish and opening-size limits together with the glass and required performance documents. Provider catalogue figures describe particular configurations. Confirm the whole-unit result, rating method and available documents for your sizes with your local designer and building official.
U-factor figures use imperial Btu/(h ft2 F) unless another unit is stated; metric values use W/(m2 K). Uf describes the frame, Ug the glass, and Uw the whole window. SHGC and ER are dimensionless. Converting units does not establish certification or Canadian code acceptance.
Canadian orders use DAP to the agreed named place, with the Canadian buyer as importer of record. Import charges, unloading and local installation need their own confirmed scope. Site access and remote delivery require individual review.
Overview
What makes the Alu-clad PVC
stand out.
Alu-clad PVC is a hybrid window: a multi-chamber PVC core carries the glass, hardware and seals, and aluminum cladding covers the frame and sash on the room side and on the exterior. The result reads as a metal window from both sides - mitered 45-degree corners, a square glazing bead, a flush-sash option - while the PVC core keeps the thermal performance of a deep PVC profile. The aluminum also stiffens the profile, so it is lighter than a conventional steel-reinforced PVC window. I quote it from your window schedule and confirm glazing, hardware and finish for the actual openings.
Compare materials in my aluminum and PVC guide.
Key Highlights
- Aluminum cladding on the room side and the exterior - no visible PVC face
- Mitered 45-degree corners instead of a visible PVC weld seam
- Classic or fully flush version with the sash set into the frame
- Square-cut glazing bead, visible or concealed hinges and hardware
- Aluminum profiles stiffen the frame in place of steel reinforcement
- Provider-published Uw from 0.73 W/m2K on the best configuration
Ideal For
Contemporary homes and energy-focused builds where the frame should read as metal inside and outside, and the budget or the U-factor target points away from a full thermally broken aluminum system.
Consider an Alternative When
This is still a PVC-core window, not a structural aluminum system. For sashes beyond the limits above, minimal sightlines or steel-look profiles, compare a thermally broken aluminum system such as Aluprof MB-79N. If aluminum is only needed on the exterior, look at Kontur Alu. If the interior should be real wood, look at Clad Flush.
Technical specifications
Construction
Multi-chamber PVC core, aluminum cladding inside and outside
Frame Depth
3.15" (80 mm) or 3.64" (92.5 mm)
U-Factor (best)
0.13 (Uw from 0.73)Units: The Uw, Uf, Ug or Ud figures shown alongside the imperial U-factor use W/(m2 K). These describe different parts of the assembly.
Glazing Range
0.94" - 2.28" (24 - 58 mm)
Air Infiltration
Class 4
Water Resistance
E900 - E1950
Wind Load
Class B5 / C5
Max Window Sash
59" x 8' 2" (1,500 x 2,500 mm)
Max Window Sash, bonded glazing
63" x 8' 10" (1,600 x 2,700 mm)
Max Door Sash
47" x 8' 2" (1,200 x 2,500 mm)
Max Door Sash, bonded glazing
51" x 8' 6" (1,300 x 2,600 mm)
Max Sash Weight
287 lbs (130 kg)
Seals
Two or three gasket levels
Finishes
RAL colors, textured and wood-effect finishes
Performance classes and the Uw value are provider-published figures for tested configurations, not a rating of every supplied unit. Size, glazing, gasket level and hardware are confirmed per order.
Larger sash limits apply only with bonded glazing. Maximum width and height are not available together on every opening type - I check each position against the schedule.
No NFRC rating is claimed for this system. If your permit needs rated units, tell me before the quote.
From this system to your opening schedule
Review the opening type, dimensions, glazing, finish and installation interface together. Provider references describe a system family; the documents for your project need to match the proposed assembly and local requirements.
Alu-clad PVC: your questions
What is an alu-clad PVC window?
A window with a multi-chamber PVC core and aluminum cladding fixed over it. In this system the cladding is on both the room side and the exterior, so the visible frame surfaces are coated aluminum while the PVC core does the insulating.
Is alu-clad PVC the same as an aluminum window?
No. A thermally broken aluminum window has a structural aluminum frame with an insulating break. Alu-clad PVC has a PVC core with aluminum cladding. It looks like metal, and the sash size and weight limits are those of this hybrid system - up to 8' 2" high and 287 lbs as standard.
How is it different from Kontur Alu?
Kontur Alu has an aluminum cover on the exterior only, so the room side is PVC. Alu-clad PVC is clad in aluminum on both faces and uses the aluminum in place of steel reinforcement.
Can I price alu-clad PVC in the online estimator?
Not yet. The estimator covers uPVC, aluminum, steel-look aluminum and aluminum-clad wood. I quote alu-clad PVC from your window schedule or drawings, usually next to an aluminum option so you can compare.
Related Systems
You might also consider.
Further Reading
Guides that cover the Alu-clad PVC.
Get Alu-clad PVC for your project
Send your window schedule and I'll have a budget estimate back to you the same or next working day.